Samsung SyncMaster 400CX-2 User Manual page 46

4. Select the "Monitor" tab.
5. Click the "Change" button in the "Monitor Type" area.
6. Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location...", then click "Next"
button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver), then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you
connected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display
Properties dialogue box.
® ®
Microsoft Windows
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
2. In Display Registration Information window, click Settings Tab and then click "All
Display Modes".
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical
frequency) and then click "OK".
4. Click "Apply" button if you see the screen working normally after clicking "Test". If
the screen is not normal, change to a different mode (lower mode of resolution,
colors or frequency).
Note
If there is no Mode at All Display Modes, select the level of resolution and vertical fre-
quency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system
setting file.
1. Press "Enter" at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
Using the Software
NT Operating System
45