Samsung SyncMaster 400CX-2 User Manual page 108

MENU →
→ , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the
ID corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
•
PC / DVI
•
AV
•
Component
•
HDMI
•
MagicInfo
•
TV
Note
MagicInfo supports the CXN-2 model only.
Note
• The remote control can be used to select MagicInfo. However, it is recommended
to use a separate USB keyboard to utilize MagicInfo fully.
• For MagicInfo in Device mode, moving external devices while booting may cause
errors. Set up external devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise,
the program (MagicInfo) may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise,
the program (MagicInfo) may stop.
• To access other sources, press the SOURCE button in MagicInfo.
• The preset password for the LCD Display is "000000".
Adjusting the LCD Display
→ → → → ENTER → → ENTER
85