Table of Contents
Advertisement
11
Cleaning & Maintenance
NOTE:
BEFORE CLEANING
→
Cleaning the Interior
→
Clean the refrigerator interior regularly. Turn power off. Wipe the interior
with a soft cloth and lukewarm soapy water. Wipe away any food spills
thoroughly. Dry all surfaces and removable parts. Avoid getting water
on the refrigerator controls. If you have taken out any removable parts,
replace them and switch on the power before re-stocking the refrigerator.
CLEANING THE EXTERIOR
→
Clean the refrigerator with only lukewarm soapy water and a soft cloth.
Rinse with clean water and then wipe the surface with a soft clean cloth
to remove any soap residue.
CLEANING THE DOOR SEALS
→
Take care to keep door seals clean. Sticky food and drink can cause seals
to stick to the cabinet and tear when you open the door. Wash seal with a
mild detergent and warm water. Rinse thoroughly and dry.
Caution
Never use hot water, solvents, commercial kitchen cleaners, aerosol
cleaners, metal polishers, caustic or abrasive cleaners or scourers to
clean the appliance as they will damage it. Many commercially available
cleaning products and detergents contain solvents that will damage your
refrigerator. When cleaning, using only a soft cloth and lukewarm soapy
water.
REPLACING THE INTERIOR LIGHT
→
The refrigerator light can only be replaced by an authorised service
agent. If the light stops working, please contact our customer service
team on 1300 11 4357.
→
Please check the points below after maintenance:
1
2
3
ENERGY SAVING TIPS
1
2
3
4
Turn appliance off at the power point, then remove the
power cord from the outlet. This will make sure there is no
chance of electric shock.
Is there any damage to the power lead?
Can the power plug be inserted into the power socket
correctly?
Is the power plug and/or lead heating up?
Reduce opening the door frequently. This will increase
the appliance efficiency and reduce power consumption.
To maintain good air circulation within the refrigerator
cabinet, keep the shelves, fruit and vegetable drawer in
the original positions as supplied.
There should always be some space between food items
for proper air circulation.
Hot food should be cooled down before placing into the
appliance, otherwise the interior temperature and power
consumption will increase.
Advertisement
Table of Contents
