The Main Parts; Flat Bed Attachment - Brother XN-2500 Operation Manual

KNOWING YOUR SEWING MACHINE — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

THE MAIN PARTS

5
4
6
7
8
9
1 Bobbin winder (Page 12)
This winds the thread onto the bobbin for use as the
lower thread.
2 Stitch length dial (Page 11)
Rotate the dial to control the stitch length.
3 Spool pin (Page 12, 16)
This holds the spool of thread.
4 Upper tension-control dial (Page 26)
This controls the tension of the upper thread.
5 Thread guide (Page 12, 16)
This is used when winding the thread onto the
bobbin and then threading the machine.
6 Thread take-up lever (Page 17)
7 Thread cutter (Page 23)
Pass the threads through the thread cutter to cut
them.
8 Needle threader (Page 18)
(This is only available on certain models.)
9 Quick-set bobbin (Page 15, 20)
(This is only available on certain models.)
0 Flat bed attachment with accessory compartment
(Page 5)
A Presser foot (Page 8)
B Reverse sewing lever (Page 11)
Push this lever to stitch in the reverse direction.
C Pattern selection dial (Page 9)
Rotate the dial in either direction to choose the
stitch you want.
D Handwheel
Used to manually raise and lower the needle.
E Buttonhole fine-adjustment screw (Page 34)
F Main power and sewing light switch (Page 7)
You can turn the main power and sewing light
switch on and off.
G Foot controller jack / socket (Page 6)
Plug in the foot controller plug and connect the
machine to the power supply.
5
3 2
1
C
B
A
D
E
F
I
G
H Presser foot lever (Page 16)
Used to raise and lower the presser foot.
I Foot controller (Page 7)
You can use this to control the sewing speed, and to
start and stop sewing.
Foot Controller: Model KD-1902 for 110/120V area
Model KD-2902 for 220/240V area
The foot controller part code differs depending on the
country or region. Contact your dealer or the nearest
authorized service center.

Flat bed attachment

The accessories can be stored in a compartment inside
the flat bed attachment.
Slide the flat bed attachment to the left to
1
open it.
1 Flat bed attachment
2 Storage compartment
H
1
2