Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Using the needle threader
(for models equipped with
a needle threader)
This feature is only available on certain models.
CAUTION
●
The needle threader can be used with a
75/11 through 100/16 home sewing
machine needle. However, the needle
threader cannot be used with a 65/9
home sewing machine needle. When
using special thread such as transparent
nylon thread or metallic thread, the
needle threader cannot be used.
●
Thread with a thickness of 130/120 or
thicker cannot be used with the needle
threader.
●
The needle threader cannot be used with
the wing needle or the twin needle.
●
If the needle threader cannot be used,
refer to "Upper threading" on page 16.
Follow steps
1
threading" on page 16 before using the
needle threader.
Lower the presser foot lever.
2
Make sure that the mark on the wheel
3
points up as shown in the following
illustration.
1 Mark on the wheel
While lowering the needle threader lever,
4
hook the thread onto the guide.
1 Needle holder
2 Needle threader lever
to
from "Upper
1
8
1
1
2
1
2
3
1 Needle holder
2 Needle threader lever
3 Guide
Pull down the needle threader lever as
5
much as possible, and then turn the lever
toward the back of the machine (away
from you). Make sure that the hook passes
through the eye of the needle and grabs
the thread.
1
1 Hook
2 Thread
• Hold the thread in front of the needle to
make sure that the hook grabs it.
1 2
18
1
Advertisement
Table of Contents
