Advertisement
¦
Installing the Stand
Preset
Top View
Front
Rear
✎
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step 1. Attach your PDP TV to the stand.
✎
Two or more people should carry the TV.
✎
Make sure to distinguish between the front and back of the stand when assembling them.
✎
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper
left of right sides of the TV.
Step 2. Fasten two screws at position 1 and then fasten three screw at position 2.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Using the remote control buttons
¦
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN
Button
Return to the previous menu.
Installing Batteries in the Remote Control
¦
Step 1
POWER
SOURCE
TTX/MIX
CH LIST
MENU
CONTENT
TOOLS
1
RETURN
2
A
B
C
@
TV
MEDIA.P
INTERNET
P.SIZE
AD
✎
NOTE
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote control. Avoid
x
using nearby special fluorescent light or neon signs.
The colour and shape may vary depending on the model.
x
English - 2
ON/OFF
PRE-CH
MENU
Display the main on-screen menu.
GUIDE
3
INFO
EXIT
EXIT
4
Exit the on-screen menu.
D
3D
SUBT.
Step 2
2
1
Button
Advertisement
