Advertisement
Installing the Stand
¦
Preset
Front
Back
✎
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step 1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
✎
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
✎
Make sure that at least two persons lift and move the PDP TV.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Step 2. Fasten two screws (M4 X L12) at position 1, and then fasten two screws (M4 X L12) at position 2.
✎
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
Using the remote control buttons
¦
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN
Button
Return to the previous menu.
Installing Batteries in the Remote Control
¦
Step 1
POWER
SOURCE
TTX/MIX
MUTE
CH LIST
MENU
MENU
MEDIA.P
TOOLS
1
RETURN
RETURN
2
A
B
P.MODE
DUAL
AD
P.SIZE
English - 2
ON/OFF
PRE-CH
GUIDE
INFO
EXIT
EXIT
C
D
f-g
SUBT.
✎
NOTE
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the
remote control. Avoid using nearby special
fluorescent light or neon signs.
x
The colour and shape may vary depending on the
model.
Step 2
MENU
Button
3
Display the main on-screen menu.
EXIT
4
Exit the on-screen menu.
Advertisement
