Changing The Temperature; Changing Spin Speed/Selecting Rinse Hold; Setting Options - AEG Electrolux LAVAMAT Lavamat 88810 User Information

Changing the temperature

Press the TEMP. key repeated-
ly until the desired temperature
is displayed.

Changing spin speed/selecting rinse hold

Press the RPM key repeated-
ly, until the desired spin
speed or
displayed.
With spin speed "0" the last
rinse water is drained off at
the end of the cycle, but the
washing is not spun.
• With
ter. There is no final spin after the intermediate spin(s). Intermediate
spins are programme-dependent and cannot be altered.

Setting options

Options can be added to a wash cycle that has already been selected.
Press the OPTIONS key. The display shows the symbols for the options.
PREWASH
Pre-washes at about 30 °C before the main wash cycle, which
follows automatically.
SENSITIVE
Enhanced rinse action through an additional rinse cycle togeth-
er with decreased drum movement (improved fabric care). This
is ideal when frequent washes are necessary, for example, in
cases of highly sensitive skin. An additional rinse cycle can also
be permanently set (see section "Setup").
RINSE HOLD is
RINSE HOLD the washing is left to soak in the last rinse wa-
LINEN/EASY CARE
Cycle end at
8
50C1 00 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS
LINEN/EASY CARE
Cycle end at
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS
12.45
14.37
OK TIME
12.45
14.37
OK TIME
15