Select The Required Programme By Turning The Programme Selector Dial; Select The Temperature; Select The Spin Speed, Rinse Hold Option - AEG Electrolux LAVAMAT 5.0 User Manual

Select the required programme by means of programme selector
dial (1)
You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button
the selected programme.
The selector dial can be turned either clockwise or anticlockwise.
Position O= Reset programme/Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position
O, to switch the machine off.
For the description of each washing programmes of the selector dial, consult the
chapter «Washing programmes».
Attention!
f you turn the programme selector dial to another programme when the machine
I
is working, the yellow pilot light of button
Err is displayed on the display to indicate a wrong selection. The machine will not
perform the new selected programme.
Select the temperature (button 2)
When selecting a programme, your appliance automatically proposes the default
temperature provided for that programme.
Press this button repeatedly to increase or decrease the temperature, if you want
your laundry to be washed at a different temperature.
By selecting the position
The maximum temperatures for each washing programme can be checked in the
paragraph «Washing programmes».
Select the spin speed or the RINSE HOLD option (button 3)
When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry
to be spun at a speed different from the one proposed by the washing machine.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out
8
starts blinking and the display shows the duration of
(Cold) the machine will wash with cold watwer.
8
will blink 3 times and the message
Use 15