Table of Contents
Advertisement
How to use
�After 10 seconds, the HBM-220 will automatically enter pairing mode.
�When the Headset enters pairing mode, the LED indicator will show
a solid blue light.
�Using your handset, find the Bluetooth menu and "search for" or
"add" new devices.
�Select "LG HBM-220" from the list of devices and pair it with your
handset.
�When asked for the passkey or PIN during pairing, please enter
"0000" (4 zeros).
�Once pairing has been completed successfully, you will hear a beep.
�After pairing has been completed, make sure you "Connect" to the
LG HBM-220.
�If you want to pair with a different device in the future, the Headset
must be in pairing mode.
�If the Headset is in pairing mode for 3 minutes without being
connected to a handset, the HBM-220 will automatically turn off.
2) Manual Pairing
�With the power off, press and hold the MFB for 7 seconds.
�When the Headset enters pairing mode, the LED indicator will show
a solid blue light.
�Using your handset, find the Bluetooth menu and "search for" or
"add" new devices.
�Select "LG HBM-220" from the list of devices and pair it with your
handset.
�When asked for the passkey or PIN during pairing, please enter
"0000" (4 zeros).
�Once pairing has been completed successfully, you will hear a beep.
�After pairing has been completed, make sure you "Connect" to the
LG HBM-220.
�If you want to pair with a different device in the future, the Headset
must be in pairing mode.
�If the Headset is in pairing mode for 3 minutes without being
connected to a handset, the HBM-220 will automatically turn off.
6
Auto reconnect
- If the HBM-220 is turned off (either accidentally or intentionally) whilst
connected to a handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the
HBM-220 is turned back on (provided that both devices are within
the required range of 33 feet 10 metres).
[ Out of range ]
- When your handset and HBM-220 are separated by a range of 33
feet (10 metres) or more, the Headset and handset will disconnect.
When the handset and HBM-220 are within the required range again,
the HBM-220 will automatically reconnect to the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the MFB on the HBM-
220 to reconnect manually.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker
volume.
- There are eight speaker volume levels.
Calling
Answering a call
- When there is an incoming call, the Headset will ring.
- Briefly press the MFB to answer the incoming call.
Making a call
- If you make a call from the handset, the call will (depending on the
phone settings) automatically transfer to the Headset. If the call is not
automatically transferred, you can manually transfer the call by briefly
pressing the MFB on the HBM-220 (handset and headset must be
paired).
How to use
7
Advertisement
Table of Contents
