Table of Contents
Advertisement
How to use
1) Easy Pairing
- Move the Power switch to the ON position to turn on the HBM-905.
When the Headset enters Pairing Mode, the LED indicator will show a
solid white light.
- Using your handset, find the Bluetooth Menu and "search for" or "add"
new devices.
Select "LG HBM-905" from the list of devices and pair it with your
handset.
If asked for the Pass/PIN code please enter "0000" (4 Zeros).*
* Note : If your handset supports Secure Simple Pairing(SSP), you will
not need to enter Pass/PIN code.
Once pairing has completed successfully, you will hear "Paired"
- Once paired, be sure to connect to the phone. You will hear "Connected ".
Some handsets might ask for permission to access the phone's contact
list.
If you receive a message from your handset, please select "OK" or
"Allow access"
•The HBM-905 will automatically turn off if not paired within 3 minutes.
2) Manual Pairing
- With the Power off, press the CALL button and move the Power Switch
to the on side at the same time.
- When the Headset enters Pairing Mode, the LED indicator will show a
solid white light.
Battery Status Alert
- To check the battery status, press and hold the VOL button for 3
seconds in the connected state.
There are 3 levels of battery status : "Battery High", "Battery Medium",
and "Battery Low".
6
Auto Reconnect
- When the HBM-905 turns off (accidentally or intentionally) while
connected to a handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the
HBM-905 is turned back on.(as long as both devices are within the
required range of 33ft. or 10m).
[ Out of range ]
- When the HBM-905 and your handset are separated by a distance of
33 feet (10 meters) or more, the Headset and handset will
disconnect. When the handset and HBM-905 are brought back within
the required distance, the HBM-905 will automatically reconnect with
the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-905 to reconnect manually.
NOTE : If The Headset does not connect with handset within 63
minutes, the Headset will automatically turn off.
Volume control
-Briefly press the VOLUME button to adjust HBM-905 speaker volume
-There are eight levels of speaker volume.
-The volume will increase one level, each time the volume button
is pressed. When the headset reaches the maximum volume level,
the next press of the button will return the headset to the lowest
volume level.
NOTE : The HBM-905 has the Automatic Volume Control that can
automatically adjust HBM-905 volume according to the environmental
noise level.
How to use
7
Advertisement
Table of Contents
