Table of Contents
Advertisement
Using the timer to switch off one or more cooking zones
1. Select the heating zone that you wish to set the timer for.
2. Touch the timer key, "00" will show in the timer display
and the "0" will blink.
3. Set the time by touching the "slider" control (e.g. 5)
4. Touch the timer key again, then "0" will blink.
5. Set the time by touching the "slider" control (e.g.9)
6. Touch the timer key again.
Now the timer is set for 95 minutes
7. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
Note: There will be a red dot in the right bottom corner of the
power level indicator which shows the timer is set for that zone.
8. When the set time expires, the corresponding cooking zone
will switch off automatically.
Note: Other cooking zones will keep operating if they were turned on previously.
16
If the timer is set on more than one zone:
1. When you set the timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the remaining time. The dot for
the corresponding zone blinks.
Note: You can check the remaining time for the other zones by touching the
corresponding heating zone selection key.
2. Once the set time expires, the corresponding zone will switch off. Then it will show
the remaining time for the other heating zone and the dot for that zone will blink.
Cancelling the timer
1. Touch the heating zone selection key for the timer that you
wish to cancel.
2. Touch the timer key, the first indicator will flash (e.g. "5")
3. Touch the "-" on the "Slider" control to set the timer to"90"
4. Touch the timer key again, the second indicator will flash (e.g. "9")
5. Touch the "-" on the "Slider" control to set the timer to"00"
The timer is now cancelled.
Note: Turning off the heating zone or cooktop will also cancel the timer.
(set to 15 minutes)
(set to 45 minutes)
17
Advertisement
Table of Contents
