Table of Contents
Advertisement
Parts and their functions
16.
Control lock button <VR LOCK>
Use this button to lock (disable) the paint control operation. It controls
GAIN (R, B), PED/FLARE (R,B) and DTL paint.
Each press of the button turns the function on or off.
On:
ON (locks the paint control value)
Off:
OFF (the paint control value changes)
z Using the control lock button <VR LOCK>
1. Use the controls (17 to 21) to make adjustments.
2. Press <VR LOCK>.
The button lights.
The unit will register this paint control value.
3. Turn the control to its center position.
4. Press <VR LOCK> again.
The button goes off and the control lock is released.
Then the control is set to the paint control value stored in step
2.
17.
R gain control <GAIN R>
Use this control to adjust the red (R) components of the white
balance.
It is controlled by control lock (VR LOCK).
(continued)
16
VR LOCK
DTL
21
17
18
GAIN
FLARE/PED
19
20
18.
B gain control <GAIN B>
Use this control to adjust the blue (B) components of the white
balance.
It is controlled by the control lock (VR LOCK).
19.
R flare/pedestal control <FLARE/PED R>
Use this control to adjust the red (R) components in pedestal or flare.
Setup mode determines whether it controls pedestal or flare.
It is controlled by the control lock (VR LOCK).
20.
B flare/pedestal control <FLARE/PED B>
Use this control to adjust the blue (B) components in pedestal or flare.
Setup mode determines whether it controls pedestal or flare.
It is controlled by the control lock (VR LOCK).
21.
DTL control <DTL>
Use this control to adjust detail enhancer effects.
It is controlled by the control lock (VR LOCK).
13
Advertisement
Table of Contents
