Brinkmann 810-4535-S Owner's Manual page 28

Step 12
Remove two M4 bolts from the sear
burner valve. Place the bezel over
the control knob mounting stem
and position over holes in Sear
Burner base and sear burner valve
assembly. Attach with two M4 bolts
which come with valve.
Step 13
Loosen the two pre-attached bolts
from the sear burner tray. Insert
bolts through the key holes of sear
burner nozzle bracket and slide
down. Tighten securely.
Warning: Never use your grill
without leak testing
all gas connections
and hoses. See the
section on "Leak
Testing" in this
manual for proper
procedures.
27
Thermocouple
Sear Burner Nozzle
Bracket
Sear Burner
Bezel