Kenwood KDC-3047M Service Manual page 9

Key
DISP
CD information display
mode ON/OFF
■DISP
■SEARCH Preout switching
FL display
RETURN
Short circuit check
• CD information display mode (sub-mode)
Key Key
CD mechanism error log
/ display
CD load error information
/ display
BAND
(forward
rotation)
CD ejection error
/ information display
TEST MODE
Description of display
Transition to the CD information
display mode (sub-mode)
Clear all of the CD information
S W P R E R
S W P R E S
Description of display
M E C H A
M E C H A
M E C H A
L O A D
L O A D
E J E C T
E J E C T
E J E C T
E J E C T
KDC-3047M/MP1046/MP145/MP145CR/MP146/MP2046
/MP245/MP246AM/MP246G/MP246S/MP3046
∗Refer to "CD information display mode" for the details of
display and operation procedure. Press [DISP] key briefl y.
Press and hold this key for 2 seconds in the CD information
display mode to clear all of the CD information.
Press and hold the [DISP] key.
E A R
Pressing and holding this key for 1 second switches the
preout. (Except KDC-MP1046)
U B – W
Turn off all the terminals → At every 125ms, turn on the
maximum odd number terminal and the maximum even
number terminal of the grid alternatively → Turn on only the
odd number terminals → Turn on only the even number
terminals →
Mechanism error log 1 (Latest)
XX: Error number. The "--" is displayed in case there is
E R 1 : X X
no error.
Mechanism error log 2 (Latest)
XX: Error number. The "--" is displayed in case there is
E R 2 : X X
no error.
Mechanism error log 3 (Latest)
XX: Error number. The "--" is displayed in case there is
E R 3 : X X
no error.
Load error switch 1
XX: The number of errors. The "--" is displayed in case
E R 1 : X X
there is no error.
Load error switch 2
XX: The number of errors. The "--" is displayed in case
E R 2 : X X
there is no error.
Ejection error switch 1
XX: The number of errors. The "--" is displayed in case
E R 1 : X X
there is no error.
Ejection error switch 2
XX: The number of errors. The "--" is displayed in case
E R 2 : X X
there is no error.
Ejection error switch 3
XX: The number of errors. The "--" is displayed in case
E R 3 : X X
there is no error.
Ejection error switch 4
XX: The number of errors. The "--" is displayed in case
E R 4 : X X
there is no error.
Description
Description
9