Kenwood KDC-3047M Service Manual page 10

KDC-3047M/MP1046/MP145/MP145CR/MP146/MP2046
/MP245/MP246AM/MP246G/MP246S/MP3046
Key Key
CD time code error count
information display (Miss-
/
ing counts)
BAND
(forward
rotation)
CD time code error
count information display
/
(Count is not updated.)
• Design version information display mode (sub-mode)
Key
Destination terminal
BAND
condition display
(forward
Development ID condition
rotation)
display
■ Test mode in Tuner source
If the following display is shown when the source is TUNER, it indicates an error.
Status
TUNER IC communication error
The adjustment is not yet made.
• TUNER band switching operation
Key
BAND BAND switching operation
TYPE BAND1
K/K1/K2 qFM1
M6 qFM1
M1/M2/M3/
M4/M5/ qFM1
C1/C2
∗ TYPE: See the parts list.
10
TEST MODE
Description of display
C N T L
C D D A
C D R O M
C N T S
C D D A
C D R O M
Description of display
T Y P E 2 1
0 9 2 8 W E 2
Description of display
T U N C O N
E R R A 9
∗ ∗
Description of display
F M 1 – 4 A
BAND2 BAND3 BAND4
FM2 FM3 wAM
FM2 FM3 wMW/LW
FM2 FM3 wMW
CD time code error count information (Missing counts)
O S E
mode is display.
Number of CD-DA error counts
XX: The number of errors. The "--" is displayed in case
: X X
there is no error.
CD-ROM (Compression fi le) number of count errors
XX: The number of errors. The "--" is displayed in case
: X X
there is no error.
CD time code error count information
T A Y
(Count is not updated) mode display.
Number of CD-DA error counts
XX: The number of errors. The "--" is displayed in case
: X X
there is no error.
CD-ROM (Compression fi le) number of count errors
XX: The number of errors. The "--" is displayed in case
: X X
there is no error.
TYPE indicates μ-com destination, and indicates condition of
: 1 1
the destination terminal in real-time.
Development code - Version (system μ-com)
– 3 . 0 0
This display indicates the status in which the communication with
N G
TUNER IC is not possible.
This display indicates the status in which the TUNER adjustment
has never been made (Adjustment value: 0X00 or 0XFF)
8 . 3 A
However the following TUNER test mode functions are valid (Note
that the display, "∗ERR∗" remains as it is.)
Every time when the [BAND] key is pressed, the BAND is
9 8 . 3 A
switched as listed in the next table for each TYPE.
BAND5 BAND6
– –
– –
eSW1 rSW2
Description
Description
Description
Description
Description
q → w
q → w
q → w → e → r