Advertisement
Pre-Ride Safety Checklist
t
To be performed by a supervising adul
Before every ride, it is important to carry out the following
safety checks. Do not ride a battery-powered ride-on toy that is
not in proper working condition! Replace any worn or broken
parts as needed.
Steering and Control
The steering wheel or handlebars are tightened and
secured in the mount or dashboard.
The steering wheel or handlebars are positioned so that
the rider can easily operate and steer the ride-on.
There must be no difficulty for the rider in turning and/or
operating the powered foot pedal or hand operated push
button.
The steering wheel or handlebars are aligned so that the
steering column and front wheels are oriented in the
same direction.
Wheels
The wheels are securely attached to the battery-powered
ride-on and they are in good condition. It is acceptable to
have slight lateral movement in each wheel.
The wheels have no holes or are worn down in any one
area and that the traction strips are intact and secured to
the wheels.
The drive wheel is securely fastened to the gear box, which
houses the motor.
Ride-on
For all electrical components, make sure:
• The battery is fully charged.
• The charging cord is NOT attached to the ride-on in
any way.
• All connectors are securely snapped in place and will
not come detached while riding.
• No wiring is exposed, worn, or detached in any way;
the motor is not hot to touch.
• All electrical buttons, including the power button,
accelerator foot pedal or hand operated button, and
any buttons for lights and sounds, work properly.
• If the ride-on's electrical components show any sign
of damage or missing parts DO NOT RIDE until the
condition is corrected.
Make sure the ride-on is:
• Clean, dry, and in good condition.
• All plastic pieces, including fenders, seat, footrests,
steering wheel or handlebars, wheels, bumpers, and/
or hub caps are securely attached.
• There are no cracks or structural problems on the
ride-on toy.
• If the ride-on toy shows any sign of damage or missing
parts DO NOT RIDE IT until the condition
is corrected.
Make sure all safety labels are in place and readable,
and understood by the rider.
Parts Checklist
Number
Part name
1
Seat
2
Seat screw (attached to seat)
3
Steering wheel
4
Steering wheel nut (attached to steering wheel)
5
Steering wheel bolt (attached to steering wheel)
6
Safety cone
7
Wheel
8
Wheel washer
9
Wheel nut
10
Hubcap
11
Cruiser body
12
Megaphone
13
Windshield
14
Gear wheel
15
Wheel wrench
16
Battery charger
4
Parts
Quantity
1
4
14
1
1
1
2
3
7
4
4
1
1
1
1
2
15
16
1
Hardware
x4
x7
Before you begin assembling, check that all parts listed are
1
2
3
4
13
12
5
11
Tools Required
x4
5
present..
6
8
7
9
10
(2 included)
Advertisement
