Getting Started - Philips DVD960 Manual

STANDARD CONNECTIONS
PROGRAMMING THE UNIVERSAL REMOTE
CONTROL
The remote control of the DVD-Video player can be program-
med to control your Television, Amplifier or Receiver. For the
control of these products the following buttons on the remote
control are available:
• Amplifier - Volume Up/Down and Audio Mute.
• Receiver - Volume Up/Down and Audio Mute.
• Television - Volume Up, Volume Down, Channel Up/Down
and TV Mute.
In order to change the remote control to control your brand of
Television, Amplifier or Reciever follow the next steps.
1 Select either your brand of Television, Amplifier or Receiver
from the next table. Mark the first 3 digit code number
behind the brand name.
2 Press ENTER en RETURN simultaneously until the
Jog/Pause button lights up.
NOTE
- Note that your remote control is now disabled for all functions.
3 Enter the digits of the selected 3 digit code number. Every
time you enter a digit, the Jog/Pause button will blink
shortly. When entering the last (3-rd) digit, the Jog/Pause
button will blink twice and then switches off to confirm
that the programming sequence was correctly executed.
NOTE
- In case you press a wrong key or an incorrect number, the
Jog/Pause button will switch off and flashes once. The remo-
te control has not been re-programmed. Repeat step 1,2 and 3.
4 The remote control is now programmed to control your
Television or Amplifier or Receiver. If it does not react
properly on the mentioned buttons, select the next 3 digit
code number behind the your brand of Television, Amplifier
or Receiver and repeat step 2 and 3.
AMPLIFIERS CODE
Aiwa 431
Grundig 420, 432
Kenwood 428, 447
Marantz 420
Philips 420, 445
Pioneer 401
Sony 415
Technics 423, 434
Yamaha 427
RECEIVERS CODE
Aiwa 536, 546, 573, 581,
586, 606, 617, 636,
647, 649
Denon 502, 704
Grundig 557, 561, 580
Harman/Kardon 531
JVC 521, 630, 645, 658
Kenwood 510, 523, 589, 590
Luxman 660, 705
Marantz 538, 557, 568
Onkyo 528, 535, 539
Philips 557, 663, 677
Pioneer 582, 645
Sansui 665, 689
Sony 545, 549
Technics 564, 588
Yamaha 526, 551, 691

GETTING STARTED

TELEVISION CODE
Bang & Olufsen
057,058
Grundig 048, 115, 119, 124,
256, 267, 271
Hitachi 026, 029, 033, 034,
064, 071, 074, 079,
095, 120, 121,134,
137, 139, 160,173,
196, 230, 269, 273,
276
JVC 029, 039, 047, 092,
098, 114, 116, 207
Panasonic 095, 130, 131, 138,
149, 192, 204, 273
Philips 000, 010, 011, 030,
033, 058, 117, 181,
209, 271
Radiola 010, 030, 181
Saba 052, 058, 074, 095,
120, 121, 124, 130,
165, 170, 187, 194,
273
OPERATION
NOTE
- Unless otherwise mentioned, all operations can be carried
out with the remote control. Always point the remote
control directly at the player, making sure there are no
obstructions in the path of the infrared beam.
- When there are corresponding keys on the front panel, they
can also be used.
SWITCHING ON
1 Switch on the TV and select the video input for your DVD-
Video player.
2 To enjoy sound through your stereo system, turn on the
system and select the source input for the DVD-Video
player.
or
To enjoy DVD-Video with multichannel (surround) sound,
switch on the Home Theatre system and select the source
input for your DVD-Video player.
3 On the back of the DVD-Video player, press ON/OFF. The
player display lights, and the OSD invites you to insert a disc.
4 With Autoplay on (the factory setting) any disc already
inserted in the player starts to play.
Insert disc
TELEVISION CODE
Samsung 000, 007, 030, 032,
059, 134, 155, 166,
184, 206, 253, 257
SBR 010, 011, 030, 033,
117
Schneider 011, 030, 135, 148,
172, 181, 188, 197,
207, 221, 268
Sony 001, 008, 009, 029,
075, 263
Telefunken 006, 051, 056, 068,
074, 130, 151, 154,
173, 187, 194, 251,
260
Thomson 074, 120, 121, 124,
165, 170, 186, 194,
196, 223
Toshiba 028, 029, 048, 147,
262, 270
english
11