Standard Connections - Philips DVD960 Manual

GENERAL NOTE
- Depending on your TV and other equipment, there are
various ways you could connect the DVD-Video player.
These are shown below.
- Please refer to your TV, VCR, Stereo System and any other
User Manual(s) as necessary to make the optimal
connections.
HIGHEST QUALITY A/V CONNECTION
Connection to a TV with an A/V Euroconnector socket
AUDIO OUTPUT
VIDEO OUTPUT
DIG. OUT
Y/C Y U/Cr V/Cb CVBS A/V EUROCONNECTOR (RGB OUT) ANALOG COAX OPTO
A/V EUROCONNECTOR CABLE
1 Connect the A/V Euroconnector on the rear of the player to
the corresponding connector on the TV using the cable
supplied.
2 Optionally you can also connect the audio Left and Right
channel sockets on the rear of the player to the
corresponding sockets on your stereo system.
NOTE
- Do not connect your DVD-player via your VCR, because the
video quality could be distorted by the copy protected system.
Connection to a TV with YUV sockets
AUDIO OUTPUT
VIDEO OUTPUT
DIG. OUT
Y/C Y U/Cr V/Cb CVBS A/V EUROCONNECTOR (RGB OUT) ANALOG COAX OPTO
1 Connect the YUV sockets on the rear of the player to the
corresponding sockets on the TV using optional cables.
2 Connect the audio left and right channel sockets on the rear
of the player to the corresponding sockets on the TV using
the cable supplied.
Alternatively, you can use the same cable to connect the
audio left and right sockets on the rear of the player to the
corresponding sockets on your stereo system.
EXCELLENT A/V CONNECTION
Connection to a TV with a video (CVBS) socket
Y/C
TV
1 Connect the Video socket on the rear of the player to the
corresponding socket on the TV using the cable supplied.
2 Connect the audio Left and Right channel sockets on the
rear of the player to the corresponding sockets on the TV
using the cable supplied. Alternatively, you can use the
same cable to connect the audio Left and Right sockets on
the rear of the player to the corresponding sockets on your
stereo system.
CAUTION
Do not connect the player's audio output to the phono
input of your stereo system.
Connection to a TV with a S-Video socket
ON / OFF
MAINS
TV
YUV Video IN
1 Connect the S-Video socket on the rear of the player to the
corresponding socket on the TV using an optional S-Video
cable.
2 Connect the audio Left and Right channel sockets on the
rear of the player to the corresponding sockets on the TV
using the cable supplied. Alternatively, you can use the
same cable to connect the audio Left and Right sockets on
the rear of the player to the corresponding sockets on your
stereo system.

STANDARD CONNECTIONS

AUDIO
AUDIO OUTPUT
VIDEO OUTPUT
DIG. OUT
Y U/Cr V/Cb CVBS A/V EUROCONNECTOR (RGB OUT) ANALOG COAX OPTO
AUDIO CABLE
AUDIO OUTPUT
VIDEO OUTPUT
DIG. OUT
Y/C Y U/Cr V/Cb CVBS A/V EUROCONNECTOR (RGB OUT) ANALOG COAX OPTO
AUDIO CABLE
S-VIDEO CABLE
english
TV
VIDEO
IN
IN
VIDEO CABLE
TV
AUDIO
VIDEO
IN
IN
9