Lochinvar EnergyRite ER202 Installation & Operation Manual page 45

10
Operating information
Access modes
Modes of operation
There are three modes of operation: 1) Off, 2) Pool, and
3) Spa. The factory default mode is Off.
Off mode
When in Off Mode the control will display CONTROL OFF
and does not monitor any of the inputs.
Display shows:
Control: OFF
Pool: Standby
Pool Temp = ***°F
Pool Mode Prepurge
Pool Mode Ignition
Pool: Heating
Standby
(continued)
Setup menu
Additional features can be accessed and adjusted through the
Setup Menu. Please reference the EnergyRite Service Manual
for a detailed description of the Setup Menu.
Service menu
Temperature rise and data logging information can be accessed
from the service menu. Please reference the EnergyRite Service
Manual for a detailed description of the Service Menu.
Status Display Screens
Description
The control module has been placed in the Off Mode.
The unit has not received a call for heat.
Indicates the current inlet water temperature.
A call for heat has been initiated. The blower has been powered and
the air pressure switch has closed.
After the prepurge period, the unit has begun a spark period to light
the main burners.
The burners have fired and the flame has been detected.
Remote is active and has either satisfied the set point or there is no
call for heat from the remote.
Installation & Operation Manual
45