Summary of Contents for Moxa Technologies DR-75 Series
Page 1
DR-75 Series Quick Installation Guide Edition 1.0, January 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...
Page 2
Dimensions Terminal Pin No. Assignments (TB1) PIN No. Assignment AC/N (DC+) AC/L (DC-) Terminal Pin No. Assignments (TB2) PIN No. Assignment 1, 2 DC Output V+ 3, 4 DC Output V- Mounting Instructions Mounting: Mount only as shown in figure, with input terminals facing downwards to allow sufficient cooling.
Page 3
Installation 1. To prevent the unit from overheating, always allow sufficient clearance around the unit for proper ventilation: 5 mm left and right, 40 mm above, and 20 mm below. You should also keep a 10 to 15 cm clearance from adjacent devices that act as a heat source. 2.
Page 4
7. Use a slotted type 4 mm screwdriver. 8. Use the following torque settings for terminals: Model DR-75 10 kgf-cm (9 in-lb) 10 kgf-cm (9 in-lb) Important Safety Precautions Before working with a power supply, be sure to read and understand these instructions carefully and completely.
Need help?
Do you have a question about the DR-75 Series and is the answer not in the manual?
Questions and answers