Moxa Technologies HDR-60-24 Series Quick Installation Manual
Moxa Technologies HDR-60-24 Series Quick Installation Manual

Moxa Technologies HDR-60-24 Series Quick Installation Manual

Advertisement

Quick Installation Guide
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
HDR-60-24 Series
Version 1.1, October 2020
Technical Support Contact Information
www.moxa.com/support
 2020 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDR-60-24 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Moxa Technologies HDR-60-24 Series

  • Page 1 HDR-60-24 Series Quick Installation Guide Version 1.1, October 2020 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...
  • Page 2 Terminal Pin Assignment unit: mm (inch) Terminal Pin No. Assignments PIN No. Assignment 1, 2 DC Output: V- 3, 4 DC Output: V+ AC input L (Live) AC input N (Neutral) LED Indicator State Description The power supply can output constant direct current.
  • Page 3 Installation 1. To prevent the unit from overheating, always allow sufficient clearance around the unit for proper ventilation: 5 mm left and right, 40 mm above, and 20 mm below. You should also keep a 10 to 15 cm clearance from adjacent devices that act as a heat source. 2.
  • Page 4 1. Risk of electrical shock and energy hazard: If the device fails, it must be examined by a qualified technician. Do not remove the DIN-rail power supply casing yourself. 2. Risk of electric arcs and electric shock (danger to life): Do not connect the primary and secondary sides together, since doing so could result in life threatening shocks.

Table of Contents