Carton Inventory; Hardware Inventory - Chamberlain LiftMaster Security+ 2500B Owner's Manual

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and the parts illustrated
below. Note that accessories will depend on the
Multi-Function
Door Control Panel
Header Bracket
Curved Door
Arm Section

Hardware Inventory

INSTALLATION HARDWARE
Hex Screw #8x3/8" (3)
Hex Bolt 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Remote Control
Transmitter Visor Clip
Motor Unit with Light Lens
Door Bracket
Trolley
Belt
Pulley Bracket
model purchased. If anything is missing, carefully
check the packing material. Parts may be stuck in the
foam. KEEP THE FOAM INTACT (see page 6.)
SECURITY✚
3-Button Remote Control
2-Conductor Bell Wire
White & White/Red
One-Piece
T-rail
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Safety Sensor
Bracket (2)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Insulated Staples (30)
Ring Fastener (3)
Handle
Drywall Anchors (2)
Rope
Carriage Bolts 1/4"-20x1/2" (2)
Wing Nut 1/4"x20 (2)
5
Belt Cap Retainer
Styrofoam
Belt
Straight Door
Arm Section
Safety Labels
and
Literature