BTC Emprex 8280ARF III Quick Installation Manual

Quick Installation Guide (English)

Hardware Installation

1. Make sure the batteries of the keyboard is installed correctly. Please follow the

polarity signs in the battery compartment.

2. Please make sure the slide switch on the top right of the keyboard is switched to

"on" before using the keyboard. When not in use, please turn the power switch to

"off" for power saving.

3. Plug the receiver directly into your available USB port on PC.

It can operate out of the box immediately after you plug the receiver USB connector

into your PC USB port. If it can't work, please visit our website to download and install

the "Pairing Tool."

You could have the receiver housed inside the receiver storage slot.

Available USB port

Microsoft® Internet Explorer 6.0 or later version (for the Internet keys)

Microsoft® Windows® 7, Windows® XP or Windows Vista® operating system

Wireless Keyboard

8280ARF III

BTC ; EMPREX

ID button

LED Indicator

Power Switch

Receiver Storage Slot

Table of Contents

Do you have a question about the Emprex 8280ARF III and is the answer not in the manual?

Page 1 Quick Installation Guide (English) Wireless Keyboard 8280ARF III BTC ; EMPREX Hardware Installation 1. Make sure the batteries of the keyboard is installed correctly. Please follow the polarity signs in the battery compartment. 2. Please make sure the slide switch on the top right of the keyboard is switched to “on”...
Page 2 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.