Signal Setting - Siemens WT47W540BY Installation And Operating Instructions Manual

Signal setting

en
M
Signal setting
S i g n a l
You can change the following settings:
The volume of the audible signal at
■
the end of the programme
and/or
The volume of the audible button
■
signals.
Activate or deactivate automatic
■
switch-off.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
Switch the dryer on.
1.
Select the Cottons programme in
2.
position 1.
Press and hold the button for the
3.
degree of dryness and, at the same
time, turn the programme selector
clockwise to position 2.
Release the button for the degree of
4.
dryness.
The setting mode is now activated and
the preset volume for the audible signal
at the end of the programme appears
on the display panel.
18
Changing the volume or automatic
switch-off
Leave the programme selector or turn it
i n g s e t t
to:
Position 2: Press the button for the
■
"Ready in" time to change the
volume of the audible signal at the
end of the programme
and/or
Position 3: Press the button for the
■
"Ready in" time to change the
volume of the audible button
signals.
Position 4: Press the button for the
■
"Ready in" time to activate or
deactivate automatic switch-off of
the dryer. "ON" for activated and
"OFF" for deactivated.
To save energy, your dryer
Note:
will switch itself off after 15 minutes
when the "Automatic switch-off"
function is active.
Exiting setting mode
You can now end the process and
switch off the dryer. The settings have
been saved.
1 = quiet,
2 = medium, 3 = loud,
4 = very loud
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud