Operation - Makita UR002GD201 Instruction Manual

Plastic blade
NOTICE:
Be sure to use genuine Makita plastic
blade.
4
5
2
► 1 . Plastic blade 2. Spindle 3. Hex wrench 4. Loosen
5. Tighten
1. Insert the hex wrench through the hole in the tool
head to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
2. Place the plastic blade onto the spindle and
tighten it securely by hand.
3.
Remove the hex wrench from the tool head.
To remove the plastic blade, follow the installation pro-
cedures in reverse.

OPERATION

Attaching the shoulder harness
CAUTION:
When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
If you put on the shoulder harness included in the
tool package and the shoulder harness of the back-
pack-type power supply at the same time, removing
the tool or backpack-type power supply is difficult in
case of an emergency, and it may cause an accident
or injury. For the recommended hanging band, ask
Makita Authorized Service Centers.
CAUTION:
Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION:
Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
1
3
For UR002G
1. Put on the shoulder harness and fasten the
buckle.
2.
Clasp the hook on the shoulder harness to tool's
hanger.
1
► 1 . Hook 2. Hanger
3. Adjust the shoulder harness to a comfortable
working position.
19 ENGLISH
2