Belkin F5D7234-4 User Manual page 50

F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 50 of 61
Limiting the Wireless Transmit Rate
Limiting the wireless transmit rate can help improve the maximum wireless
range and connection stability. Most wireless cards have the ability to limit the
transmission rate. To change this property, go to the Windows Control Panel,
open "Network Connections" and double-click on your wireless card's
connection. In the "Properties" dialog, select the "Configure" button on the
"General" tab (Windows 98 users will have to select the wireless card in the list
box and then click "Properties"), then choose the "Advanced" tab and select the
rate property. Wireless client cards are usually set to automatically adjust the
wireless transmit rate for you, but doing so can cause periodic disconnects
when the wireless signal is too weak; as a rule, slower transmission rates are
more stable. Experiment with different connection rates until you find the best
one for your environment; note that all available transmission rates should be
acceptable for browsing the Internet. For more assistance, see your wireless
card's user manual.
Problem:
How do I extend the range of my wireless network?
Solution:
Belkin recommends using one of the following products to extend wireless
network coverage throughout large homes or offices:
• Wireless Access Point: A wireless access point can effectively double the
coverage area of your wireless network. An access point is typically placed in
the area not currently covered by your G Wireless Router, and is connected
to the Router using either an Ethernet cable or through your home's power
lines using two Powerline Ethernet Adapters.
• For 802.11g (54g™) wireless networks, Belkin offers a Wireless G Range
Extender/Access Point that can be connected wirelessly to a Belkin G
Wireless Router, without requiring an Ethernet cable or Powerline Ethernet
Adapters.
These Belkin products are available at your local retailer, or can be ordered
from Belkin directly.
For network/range extension information, please visit:
www.belkin.com/networking to find out more about:
Wireless G Range Extender/Access Point (F5D7130)
Powerline Ethernet Adapter (F5D4071)
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a
Belkin Wireless Router or Belkin Access Point.
Solution:
1. Log into your Wireless Router or Access Point.