Table of Contents
Advertisement
4.2 Power Requirements
A Flowire Converter needs at least 18V to operate, nominal voltage is 24V to 48V, and maximum
voltage is 56V. The voltage at the remote Flowire Converter should never drop below half of the
PSU's output voltage.
To power a Vingtor-Stentofon IP Intercom Station through its Ethernet port, we recommend at least
40V at the remote site.
For land-based installations, use XP power PSU for FCDC1:
- Flowire XP 120 XP Power Supply Unit, 48V DC, 120W
Item no. 2990101120
- Flowire XP 240 XP Power Supply Unit, 48V DC, 240W
Item no. 2990101240
For installations with Ex equipment, use Powerbox PSU for FCDC2:
- Flowire EX 120 Powerbox PSU, 24V DC, 120W
Item no. 2990102120
- Flowire EX 250 Powerbox PSU, 24V DC, 250W
Item no. 2990102240
A100K11422
Flowire Converter Configuration Manual
13
Advertisement
Table of Contents
