Care.and.maintenance - Doro PhoneEasy 341GSM Manual

Your unit is a technically advanced product and should be treated with the greatest
care . Negligence may void the warranty .
• Protect the unit from moisture . Rain/snowfall, moisture and all types of liquid can
contain substances that corrode the electronic circuits . If the unit gets wet, you
should remove the battery and allow the unit to dry completely before you replace it .
• Do not use or keep the unit in dusty, dirty environments . The unit's moving parts
and electronic components can be damaged .
• Do not keep the unit in warm places . High temperatures can reduce the lifespan
for electronic equipment, damage batteries and distort or melt certain plastics .
• Do not keep the unit in cold places . When the unit warms up to normal
temperature, condensation can form on the inside which can damage the
electronic circuits .
• Do not try to open the unit in any other way than that which is indicated here .
• Do not drop the unit . Do not knock or shake it either . If it is treated roughly the
circuits and precision mechanics can be broken .
• Do not use strong chemicals to clean the unit .
• Maintain the battery and phone during operation between 32�� F - 86�� F
(0�� C - 30�� C) . If the phone and battery become too warm or too cold, the �� C - 30�� C) . If the phone and battery become too warm or too cold, the - 30�� C) . If the phone and battery become too warm or too cold, the
phone and battery may not work temporarily, even if the battery is fully charged .
Subjecting the phone and battery to excessive temperatures can create a safety
hazard resulting in fire, explosion or other hazards.
• Do not disassemble or open crush, bend or deform, puncture or shred .
• Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, expose to fire, explosion or other
hazard .
• Only use the battery for the system for which it is specified.
• Only use the battery with a charging system that has been qualified with the
system per IEEE-Std- 1725-2006. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact
battery terminals .
• Replace the battery only with another battery that has been qualified with the
system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may
present a risk of fire, explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local regulations .
English

Care.and.Maintenance

40
�� F - 86�� F - 86�� F �� F