Advertisement
Rear Seat Entertainment (RSE); If equipped
1. Vehicles equipped with an overhead screen only:
In this application the GMRVD2 must be used in order to feed A/V into the factory screen from an aftermarket head unit (head
unit must support A/V out). With the GMRVD2, A/V will be passed from the aftermarket head unit to the rear screen and audio
can be heard through the headphones. The GMRVD2 will also pass the Auxiliary inputs on the rear of the center console to the
aftermarket head unit.
2. Vehicles equipped with an overhead screen AND headrest monitors:
In this application the headrest monitors will function independently from the overhead monitor. Neither video or audio
can be passed to or from the headrest monitors. The overhead monitor will function exactly as described in #1.
OnStar Volume Adjustment for Vehicles w/o SWC
1. If SWC buttons are not present you must use the
programming button on the interface to control the
OnStar audio level during an OnStar connection.
2. When OnStar is active pressing the programming
button will raise the audio level 4 times before
returning to the original level.
Product Updates (Firmware)
The RP5-GM32 can be updated with new firmware as it becomes available using the PAC-UP interface updater (sold separately).
Please visit www.pac-audio.com/firmware for available updates.
Pacific Accessory Corporation
Pacific Accessory Corporation
| Ph. 866-931-8021 | support@pac-audio.com
®
©2016 Pacific Accessory Corporation
www.pac-audio.com
Radio Replacement & Steering Wheel Control Interface
with OnStar Retention for General Motors Vehicles
x3
RP5-GM32
Press the programming button
on the side of the interface while
OnStar is active to adjust the
OnStar volume
SWC Connection
Rev. 022516
Page 5
Advertisement
