Table of Contents
Advertisement
46
2
Connect the other end to your TV cable, using the cable converter if
necessary.
Important! Please ensure you use the correct cable system for your
region before attempting to connect the antenna cable.
BIOS utility
The BIOS utility is a hardware configuration program built into your computer's
BIOS.
Your computer is already properly configured and optimized, and you do not need
to run this utility. However, if you encounter configuration problems, you may need
to run it.
To activate the BIOS utility, press <F2> during the POST while the notebook PC
logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then select
Boot from the categories listed at the top of the screen.
Enable disk-to-disk recovery
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility, then
select Main from the categories listed at the top of the screen. Find D2D Recovery
at the bottom of the screen and use the <F5> and <F6> keys to set this value to
Enabled.
Advertisement
Table of Contents
