Table of Contents
Advertisement
42
Inserting an ExpressCard
Insert the card into the slot and push gently until it clicks into position.
Ejecting an ExpressCard
Before ejecting an ExpressCard:
1
Exit the application using the card.
2
Left-click the remove hardware icon on the taskbar and stop the card
operation.
3
Push the card gently into the slot and release to pop out the card. Then pull
the card free from the slot.
Installing memory
Note: Information in this section may not apply to your computer.
Follow these steps to install memory:
1
Turn off the computer, unplug the AC adapter (if connected) and remove the
battery pack. Then turn the computer over to access its base.
2
Remove the screws from the memory cover; then lift and remove the memory
cover.
EXPRESS CARD
Advertisement
Table of Contents
