Control Panel - DAEWOO ELECTRONICS FRN-Q19F Series User Manual Manual

Control Panel

■ Dispenser Models
<Models with ice crusher>
<Models without ice crusher>
FRZ.SET button
Temperature selection button for freezer
compartment.
DISPENSER/FILTER button
1) Button for dispenser function.
You can select WATER, CUBED ICE,
CRUSHED ICE(Option) or ICE LOCK.
2) Button for filter exchange or reset.
After exchanging or to reset, press the
button for 3 seconds.
REF.SET button
Temperature selection button for refrigerator
compartment.
• Interior lights of the refrigerator turn off when the doors are open for more than 10 minutes.
Note
• In case either the freezer or refrigerator door is left open for more than a minute, door alarm rings for 5
minutes with 1 minute intervals.
• Display off function
- 5 minutes after no buttons or doors are operated by customer, all the display LED except for water, ice
and ice lock icon go out.
- Normal display mode resumes when customers operate buttons or doors.
• System off function (power off function)
- You can stop operating the appliance without unplugging, especially on holidays.
- Pressing FRZ.SET and REF.SET button at the same time for 5 seconds will turn the appliance off.
- Under the 'off' mode, freezer and refrigerator temperature displays "-- --".
- Other LED lights go out and all the operation of your appliance halts.
- Conversely, pressing FRZ.SET and REF.SET button together for 5 seconds will switch it back on.
10 | EN
Lock button for control panel
Press button for more than 3 seconds to
activate and prevent settings from being
unintentionally changed.
To unlock, press for more than 3 seconds.
The display goes out.
Filter change display
After 6 months of first power input, the icon
will flicker.
Indicators for water/ice dispenser
An LED above the icon will light up to indicate
your selection for dispenser.
You can choose 'water' -> 'cubed ice' ->
'crusher ice(option)' -> 'ice lock' by pressing the
'DISPENSER' button.
Indicator for control panel LOCK.