Getting Start - TRENDnet TEW-687GA 1.0R User Manual

3.4 Getting Start

1. Connect an Ethernet cable from the LAN port on your PC to the LAN port on the
TEW-687GA .
2. Plug in the power adapter and verify the Power & Ethernet LEDs are light.
3. To configure the router, open your browser, type 'http://192.168.10.110' or
'http://tew687ga.trendnet/' into the address bar and click 'Go' to get to the setup wizard
page.
4. At the Password prompt, the User name is 'admin' and password is admin. Enter default
username and password and press "ok"
15