Canon LEGRIA HF R706 Instruction Manual page 276

Trouble?
Wi-Fi connection terminated
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
- The camcorder may not be able to connect to the access point if
too many devices are accessing it. Wait awhile and try again to
establish the connection.
Wi-Fi error. Incorrect authentication method.
- Make sure the camcorder and access point are using the same
authentication/encryption method and password (encryption key).
- If the access point is using MAC address filtering, enter the cam-
corder's MAC address in the access point's configuration screen.
Wi-Fi error. Incorrect encryption method.
- Make sure the camcorder and access point are using the same
authentication/encryption method.
- If the access point is using MAC address filtering, enter the cam-
corder's MAC address in the access point's configuration screen.
Wireless communication is not working correctly
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
- Turn off the camcorder and access point. After a short while, turn
them on again and perform the Wi-Fi network setup again. If the
problem persists contact a Canon Service Center.
276