Canon LEGRIA HF R706 Instruction Manual page 272

Trouble?
- Try turning off the camcorder and connect station. After a
moment, turn them on again and restore the connection. If the
problem persists, contact a Canon Service Center.
Closing the LCD panel turns off the camcorder. File transfers in
progress will be interrupted.
- Keep the camcorder's LCD panel open while a wireless file transfer
to the optional CS100 Connect Station is in progress.
Incorrect Wi-Fi password.
- The password (encryption key) is case sensitive so make sure to
enter it correctly.
Invalid port number. Perform the setting again.
- The port number entered cannot be used. In the settings for the
Monitor while Out function (A 180) change the port number to a
port that does not conflict with other devices.
IP address conflict
- Change the IP address of the camcorder or of any conflicting
device to avoid the same IP address being assigned to multiple
devices on the same network.
Memory card cover is open
- The memory card slot cover was opened while the memory card
was being accessed. Stop the Wi-Fi function in use and end the
Wi-Fi connection.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal at the
same time. Try the operation again later or perform setup using the
[WPS: PIN Code] or [Search for Access Points] option (A 204).
272