Canon LEGRIA HF R706 Instruction Manual page 258

Trouble?
R Wi-Fi Functions
Refer also to the instruction manual of the access point and other
devices you will use.
Cannot connect with the access point.
- Check that the access point is working correctly.
- The effective communication range between the camcorder and
access point may vary depending on the strength of the wireless
signal. Try using the camcorder closer to the access point.
- To avoid interference, use the camcorder at some distance from
devices that emit electromagnetic waves (cordless phones, micro-
wave ovens, etc.).
- Wi-Fi networks with a stealth function that do not broadcast their
network name (SSID) will not be detected by the camcorder during
the Wi-Fi network setup. Perform the setup manually (A 208) or
turn off the stealth function of the access point.
Wireless playback on a computer or similar device is not smooth.
- Playback may not be smooth depending on the access point's set-
tings and capabilities. Try using the camcorder closer to the access
point and remove any obstructing objects or obstacles between
them.
- Connect the computer to the access point using a LAN cable.
- Turn off the wireless functions of nearby wireless devices (Wi-Fi,
Bluetooth) other than the computer or similar device being used for
playback.
- Switch the wireless access point to IEEE 802.11n. Refer to its
instruction manual for details.
258