Related Manuals for A-Neuvideo ANI-315XLT
Summary of Contents for A-Neuvideo ANI-315XLT
- Page 1 ANI-315XL Transmitter & Receiver HDMI over CAT5e/6 Extender with IR/RS-232 ANI-315XLT ANI-315XLR A-NeuVideo.com Frisco, Texas 75036 AUDIO / VIDEO MANUFACTURER...
- Page 2 SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
-
Page 3: Table Of Contents
We assume no responsibility for any inaccuracies that may be TRANSMITTER PACKAGE contained in this document. We make no commitment to update or • ANI-315XLT HDMI over CAT5e/6 Transmitter w/ IR/RS-232 to keep current the information contained in this document. • IR Blaster (included with Transmitter module only*) •... -
Page 4: Features
NEUVIDEO FEATURES & SPECIFICATIONS FEATURES • HDMI with 3D, 4K2K support, HDCP and DVI compliant • Complies with the HDBaseT Lite class ™ • Supports HDMI (including HDCP) over a single CAT5e/6 up to 196 ft (60M) • Full HD resolution supports (1080p@60Hz/36bit), 3D and 4K2K for up to ~131 ft (40M) and PC resolution supports (VGA to WUXGA) over a CAT5e/6 cable •... -
Page 5: Operation Controls & Functions
NEUVIDEO OPERATION CONTROLS & FUNCTIONS Transmitter Front & BACK Panels IR OUT/BLASTER: Connects to the supplied IR blaster for IR signal transmission to the source equipment. Place the IR blaster in direct line-of-sight of the equipment to be controlled. HDMI IN: Connects to the HDMI input source devices such as a DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable. -
Page 6: Ir Pin Assignment
NEUVIDEO OPERATION CONTROLS & FUNCTIONS Transmitter & Receiver Top Panels LINK LED: This LED will illuminate blue when the devices are connected with a CAT5e/6 cable. If the data transmission has an error the LED will blink. IR Pin Assignment IR Blaster Power 5V IR Blaster Signal... -
Page 7: Connection Diagram
NEUVIDEO CONNECTION DIAGRAM CONNECTION DIAGRAM... - Page 8 BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to A-NeuVideo, Inc. at the return address set forth on the Product’s packing label at your expense.