Controls And Functions / Connections (G1N) - Zoom G1N Operation Manual

Controls and Functions / Connections (G1N)

Module selector
Switches between play mode, rhythm mode,
and edit mode. In edit mode, the knob selects
the module/parameter for operation.
RHYTHM [ / ] key
R P
Serves to start and stop the rhythm pattern in
play mode and rhythm mode.
Display
Shows bank and patch numbers, setting values,
and other information for operating the G1N.
[INPUT] jack
Serves for connecting the guitar.
When operating the G1N on
batteries, inserting the guitar
Guitar
cable plug into this jack will
turn the unit on.
When operating the G1N on batteries, it is
advisable to disconnect the guitar cable
plug from the [INPUT] jack when not using
the unit, to conserve battery power.
[OUTPUT/PHONES] jack
This stereo phone jack serves for connection to
the guitar amplifier. It is also possible to use a Y
cable for sending the output to two amplifiers, or
to plug a pair of stereo headphones into this jack.
4
Top Panel
Rear Panel
Headphones
ZOOM G1N/G1XN
[VALUE] knob
This knob serves for changing parameter values and setting the
level of the overall patch.
[STORE] key
Serves for storing edited patches in memory and for copying
patches to another location.
[BANK UP·TAP] key
In play mode, the key switches to the next higher bank. In other
modes, the key serves for manual adjustment of rhythm pattern
tempo as well as parameters related to timing and cycle.
[ ]/[ ] foot switches
W Q
These switches are used for selecting patches, controlling the tuner,
and other functions.
[DC IN] jack
An AC adapter (ZOOM AD-0006) with a rated
output of 9 volts DC, 300 mA (center minus plug)
can be plugged into this jack.
AC adapter
[CONTROL IN] jack
Serves for connection of the optional foot switch (FS01)
or expression pedal (FP01/FP02).
FP01/FP02
Guitar amplifier
FS01
ZOOM G1N/G1XN
Controls and Functions / Connections (G1N)
5