Operation Instructions - Sunbeam SGC7701 User Manual

OPERATION INSTRUCTIONS

SETTING THE CLOCK
Touch CLOCK pad.
1.
Use the number pads to enter the correct time. You must touch at least three numbers to set the clock (one for hour
2.
and two for minutes).
Touch CLOCK pad again.
3.
NOTE:
·This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the
display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.
SETTING THE TIMER
Touch TIMER.
1.
Enter the amount of time by touching the number pads.
2.
Touch START/STOP.
3.
NOTE:
·Time countdown can be seen in display before clock or cooking time is returned to display.
·Touch TIMER and then touch RESET to cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A. One-stage Cooking
Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99
1.
seconds.
The default setting is 100% microwave power output. If you want to set a power level other than 100%, touch
2.
POWER, and then use the number pads to enter the power level.
Touch START/STOP to start cooking.
3.
Use single digits to set a cooking power level:
Number pad
9
8
7
6
5
4
3
2
1
0
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
Cooking power
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
6