Table of Contents
Advertisement
M520 series oscilloscope with rollmode
5. Data viewer main window
Figure 5.1. shows the main window of the data viewer.
The main window consists of the waveform screens, control elements, set of
measured data and the main menu. The first operation you have to perform is opening
the data file you want to view. If no file is opened, most of the control elements are
inactive.
5.1. Opening the data file
The viewer is designed to use data created by the "Roll mode" of M520 series
oscilloscopes. Every file is created with extension "rmd". Structure of the data file is
designed for handling huge amount of data. To speed up operations with the data file
some data integrity checks are not performed. Please note that opening the file
containing data incompatible with the viewer data structure can lead to unpredicted
behaviour of the viewer.
WARNING: Opening the incompatible file can lead to unpredictable behaviour
of data viewer.
The control elements for opening the data file are located on the lower left side
of the screen.
Fig. 5.1. – The data viewer main window
User's Guide
- 22 -
Advertisement
Table of Contents
