Connecting the HDTV(720p/1080i)
Connect the video/audio cable as shown in the below figure and then, connect the
power cord (See page A10).
Connect the input terminal with a proper color match.
•
•
Video
Monitor
HDTV Receiver
* The HDTV terminal also supports SDTV (480i/480p).
Select an input signal.
Press the Input Select button on the remote controller to select the input signal.
Or, press the SOURCE button at the front side of the monitor.
When connecting with an HDTV/audio cable.
• Select COMPONENT 1 / COMPONENT 2
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
COMPONENT 1
COMPONENT 2
[Case 2]
A15