Connecting the DVD(480i)
Connect the video/audio cable as shown in the below figure and then, connect the
power cord (See page A10).
Connect the input terminal with a proper color match.
•
•
Video
Monitor
DVD
Select an input signal.
Press the Input Select button on the remote controller to select the
input signal. Or, press the SOURCE button at the front side of the
monitor.
When connecting with a DVD/audio cable.
• Select COMPONENT 1 / COMPONENT 2
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
VIDEO2(S-Video)
COMPONENT 1
COMPONENT 2
[Case 2]
A14