Connect Aw1000 To Your Home Wi-Fi Network - Philips Fidelio A1 User Manual

4 Connect
AW1000 to
your home Wi-
Fi network
To connect AW1000 to your existing home Wi-
Fi network, you need to apply your home Wi-Fi
settings to AW1000.
Choose your best setup method based on the
preconditions listed below.
Platform Type of Other
of your your Wi-Fi require-
mobile router ment
device
iOS Non-WPS No
Android Non-WPS No
Either WPS No
iOS or
Android
Setup method
Choose option
1 (see 'Option
1: Set up wire-
less connection
to a non-WPS
router through
an iOS device'
on page 10).
Choose op-
tion 2 (see
'Option 2: Set
up through a
non-WPS Wi-Fi
router and
Android device'
on page 12).
Choose option
3 (see 'Option
3: Set up wire-
less connec-
tion to a WPS
router' on page
14).
Either Either non- You
iOS or WPS or have an
Android WPS Ethernet
cable.
Before connection of AW1000 to your home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW1000 has been powered on and
booted up successfully (see 'Connect
power and switch on' on page 8).
c you have jotted down your Wi-Fi
password.
Once connected successfully, AW1000 will
remember your home Wi-Fi settings. Then you
can play music or listen to Internet radio via
Philips AirStudio+ Lite whenever AW1000 is
powered on and connected to your home Wi-
Fi network automatically.
Choose option
4 (see 'Option
4: Set up wired
connection
through an
Ethernet cable'
on page 16).
EN 9