Table of Contents
Advertisement
Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the device.
•
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
•
Before you connect the AC cord, make sure that you
have completed all the other connections.
1
Read the power connection instructions
on the app.
2
Connect the AC power cord to
the DC IN socket on the back of the
•
device.
•
the wall power socket.
» The device switches on automatically.
» The power/status indicator blinks
amber during boot-up.
» After a while, for first-time setup, the
power/status indicator turns solid
amber.
8
EN
3
Tap Next on the app screen to continue.
Switch between normal and Eco power
standby mode
•
To switch the device to normal standby
mode, briefly press .
» The power/status indicator turns green.
•
To switch the device to Eco power standby
mode, press and hold for less than 3
seconds and then release the button.
» The power/status indicator turns
amber for a short while and then turns
off.
•
To switch the device on from normal or
Eco power standby mode, briefly press
again.
Operation
On -> Nor-
Briefly press .
mal standby
On/Normal
Press and hold
standby ->
for less than 3
Eco power
seconds and then
standby
release the button.
Normal
Briefly press .
standby/
Eco power
standby ->
On
LED status
Amber/white
-> Green
Amber/white
or green ->
Off
Green/Off ->
Amber/white
Advertisement
Table of Contents
