Table of Contents
Advertisement
PW-AN401/PW-AN401D
Automatic - Select WPA or WPA2 automatically based on the wireless station's
1)
capability and request.
WPA - Wi-Fi Protected Access.
2)
WPA2 - WPA version 2.
3)
•
Encryption - You can select either Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port used by radius service.
•
Radius Password - Enter the password for the Radius Server.
Group Key Update Period - Specify the group key update interval in seconds. The value can be
either 0 or at least 30. Enter 0 to disable the update.
Note:
You will be reminded to reboot the device after clicking the Save button.
3) Repeater (Range Extender)
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2-Personal(Recommended) - Select WPA/WPA2 based on Radius Server.
•
Version - You can select one of following versions.
150M Wireless N Access Point User Guide
Figure 4-17 Wireless Security – Repeater
44
Advertisement
Table of Contents
