Table of Contents
Advertisement
PW-AN401/PW-AN401D
4.2 Status
Selecting Status will enable you to view the AP's current status and configuration, all of which is
read-only.
Firmware Version - This field displays the current firmware version of the AP.
Hardware Version - This field displays the current hardware version of the AP
Wired - This field displays the current settings or information for the Network, including the
MAC address, IP address and Subnet Mask.
Wireless - This field displays basic information or status for wireless function, including
Operating Mode, SSID, Channel, Mode, Channel Width, Max Tx Rate and MAC Address.
Traffic Statistics - This field displays the AP's traffic statistics.
System Up Time - This filed displays the run time of the AP since it's powered on or reset.
Note:
If you select Client mode in Figure 4-19, the wireless status in Figure 4-3 will change, similar to the
figure below:
150M Wireless N Access Point User Guide
Figure 4-3 Device Status
21
Advertisement
Table of Contents
