Set Menu Items - Yamaha RX-V1 Owner's Manual

The SET MENU consists of eighteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features.
Choose the appropriate item and adjust or select the values as necessary.
Notes:
• You can adjust the items in the SET MENU while reproducing a source.
• We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it is to see the
front panel display on this unit while adjusting SET MENU items.
Descriptions
Items
1. SPEAKER SET
1A. CENTER SP Selects the output mode suitable for your Center speaker.
Selects the output mode suitable for your Main speakers.
1B. MAIN SP
Selects the output mode suitable for your Rear speakers.
1C. REAR L/R SP
1D. REAR CT SP Selects the output mode suitable for your Rear Center speaker.
Selects the speakers for your LFE/BASS signal output.
1E. LFE/BASS OUT
1F. FRNT EFCT SP Selects the output mode for your Front Effect speakers.
1G. MAIN LEVEL Selects the output level for your main channels.
2. LOW FREQ. TEST Matches the Subwoofer level with the level of the other speakers.
3. DOLBY D. SET
Adjusts the output level of the LFE channel for Dolby Digital signals.
3A. LFE LEVEL
3B. D-RANGE Adjusts the dynamic range for Dolby Digital signals.
4. DTS SET
Adjusts the output level of the LFE channel for DTS signals.
4A. LFE LEVEL
5. SP DELAY TIME Adjusts the delay time for Center and Rear Center speakers.
6. AUDIO DELAY Adjusts the delay time for all channels.
7. CENTER GEQ Matches the Center speaker tonal quality with the Main speakers.
Controls the tonal quality of the Rear Center speaker.
8. REAR CT GEQ
9. CINEMA EQ
9A. L, C, R EQ Adjusts the tonal balance of the Main and Center speakers, Front Effect speakers,
Rear speakers and Rear Center speaker separately.
9B. FRNT EFCT EQ
9C. REAR L/R EQ
9D. REAR CT EQ
Adjusts the tonal balance of the headphones.
10. HP TONE CTRL
11. PARAMETER INI Initializes the parameters of a group of DSP programs.
12. 6.1/ES AUTO Selects the AUTO mode of Dolby Digital Matrix 6.1 and DTS ES decoding.
13. MEMORY GUARD Locks DSP program parameters and other SET MENU settings.
14. CMPNT-V INPT Selects the equipment to be connected to the component video inputs A, B or C.
15. INPUT MODE Selects the initial input mode of the sources connected to D-TV, CBL/SAT and
VCR 1.
16. INPUT RENAME Changes the name of the inputs.
Adjusts the brightness of the front panel display.
17. DIMMER
18. ZONE 2 SET Selects the mode of Zone 2.

SET MENU Items

Setting (Bold as default)
LRG / SML / NONE
LARGE / SMALL
LRG / SML / NONE
LRG / SML / NONE
SW / MAIN / BOTH
YES / NONE
Normal / –10 dB
TEST TONE: OFF / ON
OUTPUT: MAIN L/R, MAIN L, CENTER,
MAIN R, R SUR.(REAR R), REAR CT,
L SUR.(REAR L), SUBWOOFER, FRONT
FREQ.: 35 Hz-250 Hz
SPEAKER: –20 dB to 0 dB
HEADPHONE: –20 dB to 0 dB
SP(SPEAKER): MAX / STD / MIN
HP(HEADPHONE): MAX / STD / MIN
SPEAKER: –10 dB to +10 dB (0 dB)
HEADPHONE: –10 dB to +10 dB (0 dB)
CENTER: 0 ms to 5 ms
REAR CNTR: 0 ms to 30 ms (3 ms)
0 ms to 99 ms
5-band: –6 dB to +6 dB (0 dB)
5-band: –6 dB to +6 dB (0 dB)
LCR, FRNT EFCT, REAR L/R, REAR CT: OFF /
ON
HIGH-
FRQ: 1 kHz to 12.7 kHz
GAIN: –9 dB to +6 dB (–3 dB or 0 dB)
PEQ-
FRQ: 1 kHz to 12.7 kHz (8 kHz or 12.7 kHz)
GAIN: –9 dB to +6 dB (–3 dB or –4 dB)
BASS, TRBL: –6 dB to +3 dB (0 dB)
1 to 12
ON / OFF
OFF / ON
A: DVD
B: D-TV
C: CBL/SAT
D-TV: AUTO / LAST
CBL/SAT: AUTO / LAST
VCR1: AUTO / LAST
Up to eight characters.
–4 to 0
CTRL IN : MODE 1 / MODE 2
ZONE 2 OUT: FIX(fixed) / VAR.(variable)
Page
43
43
43
44
44
45
45
46
47
48
48
48
49
49
50
51
51
51
52
52
52
53
53
53
41