Controls And Functions; Front Panel - Yamaha RX-V1 Owner's Manual

Front Panel

STANDBY/ON
~ STANDBY/ON
Turns this unit on (On mode) and off (Standby mode). When
you turn on this unit, you will hear a click and there will be a
four to five to second delay before this unit can reproduce
sound.
In Standby mode, this unit consumes a small amount of power
so it can respond to the remote control.
Ÿ Remote Control Sensor
Receives signals from the remote control.
! Front Panel Display
Shows information about the operational status of this unit (see
page 10).
⁄ INPUT MODE
Selects the mode of input for sources that output two or more
types of signals to this unit (see page 33).
You cannot control the input mode when you select 6CH
INPUT as the input source.
@ INPUT SELECTOR
Selects the input source (DVD, LD, D-TV, CBL/SAT,
VCR 1, VCR 2, VCR 3, V-AUX, PHONO, CD, TUNER,
TAPE, MD) you want to listen to or watch.
¤ VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
# PHONES
Outputs audio signals for private listening using headphones.
When you connect headphones, no signals are output to the
PREOUT jacks or the speakers.
6

Controls and Functions

NATURAL SOUND AV RECEIVER RX-V1
SPEAKERS
PROGRAM
A B EFFECT
PHONES BASS TREBLE
0
1 1 1 1
2 2 2 2
3 3 3 0 3
4 4 4 4
– + – +
5 5 5 5
D I G I T A L
CINEMA DSP DOLBY
D I G I T A L
S U R R O U N D
INPUT SELECTOR
INPUT MODE
6CH IMPUT A/B/C/D/E PRESET/TUNING
PRESET/TUNING FM/AM
EDIT
BALANCE BASS PROCESSOR REC OUT/ZONE 2
VIDEO AUX
SOURCE/REMOTE
EXTENSION DIRECT
0
S VIDEO VIDEO
1 1
LD DVD
2 2 D-TV MD
CBL/SAT TAPE
3 3
VCR 1 TUNER
VCR 2 CD
4 4
VCR 3 PHONO
L 5 5 R
ON OFF VIDEO AUX
‹ SPEAKERS A/B
When pushed in (ON), these buttons turn on the set of Main
speakers connected to the A and/or B terminals on the rear
panel.
$ BASS
Adjusts the low frequency response for the left and right Main
speaker channels.
Turn the control to the right to increase the low frequency
response and turn the control to the left to decrease the low
frequency response.
If you increase or decrease the low frequency sound to an
extreme level, the tonal quality from the Center, Front Effect,
Rear Center, and Rear speakers may not match that of the left
and right Main speakers.
› PROGRAM
Selects the sound field program (see page 34).
Selecting a sound field program turns on the effect.
% TREBLE
Adjusts the high frequency response for the left and right
main channels.
Turn the control to the right to increase the high frequency
response and turn the control to the left to decrease the high
frequency response.
If you increase or decrease the high frequency sound to an
extreme level, the tonal quality from the Center, Front Effect,
Rear Center, and Rear speakers may not match that of the left
and right Main speakers.
VOLUME
MEMORY TUNING MODE
MANL/AUTO FM AUTO/MANL MONO
L AUDIO R
PRESET/TUNING FM/AM MEMORY TUNING MODE
EDIT MANL/AUTO FM AUTO/MANL MONO
/