Yamaha RX-V990 Owner's Manual page 16

CONNECTING S VIDEO TERMINALS
If your video cassette recorder, video disc player, monitor, etc., are equipped with "S" (high-resolution) video
terminals, connect them to this unit's S VIDEO terminals. Otherwise, use the composite video terminals of the unit.
Note:
• If video signals are sent to both the S VIDEO input and composite input terminals, the input signals will be sent to the
respective S VIDEO output and composite output terminals independently.
Video Cassette recorder 2
ON SCREEN DISPLAY
If you connect a video cassette recorder, video disc player, monitor, etc., to this unit, you can display DSP
program names and information about the other settings and adjustments on the video monitor screen. This
information is superimposed over the video image.
If there is no program material on the monitor, the information will be displayed over a monochromatic back-
ground.
Notes:
• If you use a video monitor that is connected to both the S VIDEO and composite terminals, the screen display informa-
tion is only output from the S VIDEO terminals.
• When no video signal is input to any of the S VIDEO or composite video input terminals, the screen display information
is output from the S VIDEO and composite MONITOR OUT terminals with a monochromatic background.
CONNECTING TO VIDEO AUX TERMINALS (FRONT PANEL)
These terminals are used to connect any video input source such as a camcorder to this unit.
16
VIDEO
VIDEO
IN
VIDEO AUX
8 VIDEO VIDEO L AUDIO R
AUDIO OUT
AUDIO OUT
VIDEO OUT
S VIDEO OUT
VIDEO SIGNAL
S VIDEO
IN
VCR 1
OUT
IN
VCR 2
OUT
LD/TV
MONITOR
OUT
S VIDEO
OUT
S VIDEO
IN
Monitor TV
R
8 VIDEO
L
Video Cassette recorder 1
VIDEO
OUT
LD player
VIDEO S-VIDEO
Camcorder